New USGS Urban Flood Equations for Alabama & Mississippi: Try Your Basin with our Calculator

USGS released a new set of Urban regression equations in the state of Alabama in September of 2026. Have an old calculation that says the 100-year flow is 6,700 cfs? Run the same basin through the new USGS urban equations and you might get closer to 6,010 cfs. That’s the difference for the example below. Your basin may go the other direction. I wanted a quick way to see how much the answer moves, so I put the equations side by side. Generally however there is a blanket reduction, with ranges of the 100-year (or 1-percent AEP) of -22% to +14%.
What Changed
In September 2026, USGS published new urban flood-frequency equations for Alabama and Mississippi. The study updated the at-site flood-frequency estimates for 64 urban streamgages using annual peak flows through water year 2024. Estimates from 42 of those gages went into the final regression. The new equations supersede the earlier Alabama and Mississippi urban equations. If you’re checking an older Alabama report, the one you’ll likely recognize is the 2010 Hedgecock and Lee study.
[New USGS report, SIR 2026-5044] (https://pubs.usgs.gov/publication/sir20265044) ·
[2010 Alabama report](https://pubs.usgs.gov/sir/2010/5012/pdf/sir2010-5012.pdf)

Two numbers in, eight peak flows out
1. Drainage area, in square miles. Delineate to the point you care about and make sure the basin boundary makes sense. If you’re working in an urban area, check whether storm drains or road crossings move water across the divide that the terrain suggests.
2. Percent developed land. The new equations use LC11DEV, the sum of developed land classes 21–24 in the 2011 National Land Cover Database. That includes developed open space. If your report gives you percent impervious, look for LC11DEV before plugging in a number.
USGS Streamstats is a great quick and dirty way to get your required input numbers. However, they do not incorporate the new set of equations as of November 2026!!! And for anything you are doing more detailed hydrology on (i.e. LOMR or no-rise), you need to dial in those inputs (especially on the smaller urban basins!).
Try it now
Here’s my black-box version. Enter your drainage area in mi² and percent developed land. Enter 50 if you mean 50%. You’ll see the new Alabama–Mississippi estimates and the legacy Alabama estimates side by side.
Try 10 mi² and 50% developed. For the 1% annual chance flood, the 2026 equation gives about 6,010 cfs, compared with 6,700 cfs from the 2010 Alabama equation. Same inputs, about 10% lower in this example. A difference like that is enough to make me check what went into an old study before I carry the number forward.
**Use at your own risk.** The new study’s ranges are 1.06–53.6 mi² and 20–100% developed land. THERE IS NO CAVEAT ABOUT EXCXLUDING THE HYDROLOGIC REGION 3 (CHALK) RESULTS SIMILAR TO THE 2010 STUDY. I am planning to investigate the gages used to see if a region 3 gage is present, and will let you know when I do. The calculator screens those numeric limits and leaves out individual estimates outside their respective study ranges. It can’t tell you whether that new detention pond controls the peak or whether a nearby gage ought to drive the estimate. The USGS report walks through both the gaged and ungaged cases. [USGS application guidance](https://pubs.usgs.gov/publication/sir20265044/full)
How much confidence should I put in the answer?
The numbers look precise in a table, but there’s real spread behind them. USGS reports a standard error of prediction of 25.7% for the 1% AEP and 36.1% for the 0.2% AEP. Those are study-wide measures, so don’t read them as a site-specific confidence interval. If you have a gage on the same stream, check the report’s guidance on using that record before settling on a peak flow. [USGS coefficient and error tables] (https://www.usgs.gov/data/results-weighted-least-squares-wls-regression-42-usgs-streamgages-urban-areas-alabama-and)

In addition, USGS SIR 2025-5104 is a Tennessee-led study of urban flood frequency that also covers parts of Alabama, Georgia, Mississippi, North Carolina, and South Carolina. It used peak-flow records through water year 2022 from 136 streamgages. The equations use drainage area, percent developed land, and the share of the basin in the Piedmont and Ridge and Valley ecoregions. USGS report
For this comparison, I left it out because SIR 2026-5044 was developed specifically for urban streams in Alabama and Mississippi and uses the same two inputs as the legacy Alabama equations.
Happy (voodoo) Hydrology!



Comments